3com 5500-ei pwr Instruccion De Instalación

 

4-2 

Before rebooting, the system checks whether there is any configuration change. If yes, it prompts 

whether or not to proceed. This prevents the system from losing the configurations in case of shutting 

down the system without saving the configurations 

 

Use the following command to reboot the Ethernet switch: 

Reboot the Ethernet switch 

reboot [ unit unit-id ] 

Available in user view 

 

After you schedule a reboot on the switch, the switch will reboot at the specified time. 

Follow these steps to schedule a reboot on the switch: 

Schedule a reboot on the switch, and 
set the reboot date and time 

schedule reboot at hh:mm 
[ mm/dd/yyyy | yyyy/mm/dd ] 

Optional 

Schedule a reboot on the switch, and 
set the delay time for reboot  

schedule reboot delay { hh:mm | 
mm } 

Optional 

Enter system view 

— 

Schedule a reboot on the switch, and 
set the reboot period 

schedule reboot regularity at 
hh:mm period 

Optional 

 

The switch timer can be set to precision of one minute, that is, the switch will reboot within one minute 

after the specified reboot date and time. 

 

This function enables you to dynamically record the system running status, such as CPU, thus 

facilitating analysis and solution of the problems of the device. 

Follow these steps to configure real-time monitoring of the running status of the system: 

Enter system view 

— 

Enable real-time monitoring of 
the running status of the 
system 

Optional 

Enabled by default.