3com 5500-ei pwr Instruccion De Instalación

 

4-5 

Display main parameters of 
the pluggable transceiver(s) 

display transceiver interface 
[ interface-type 
interface-number ] 

Available for all pluggable 
transceivers 

Display part of the electrical 
label information of the 
anti-spoofing transceiver(s) 
customized by H3C 

display transceiver 
manuinfo interface 
[ interface-type 
interface-number ] 

Available for anti-spoofing 
pluggable transceiver(s) 
customized by H3C only 

 

z 

You can use the Vendor Name field in the prompt information of the display transceiver 

interface command to identify an anti-spoofing pluggable transceiver customized by H3C. If the 

field is H3C, it is considered an H3C-customized pluggable transceiver. 

z 

Electrical label information is also called permanent configuration data or archive information, 

which is written to the storage device of a card during device debugging or test. The information 

includes name of the card, device serial number, and vendor name or vendor name specified. 

The system outputs alarm information for you to diagnose and troubleshoot faults of pluggable 

transceivers. Optical transceivers customized by H3C also support the digital diagnosis function, which 

enables a transceiver to monitor the main parameters such as temperature, voltage, laser bias current, 

TX power, and RX power. When these parameters are abnormal, you can take corresponding 

measures to prevent transceiver faults. 

Follow these steps to display pluggable transceiver information: 

Display the current alarm 
information of the pluggable 
transceiver(s) 

display transceiver alarm interface 
[ interface-type interface-number ] 

Available for all pluggable 
transceivers 

Display the currently measured 
value of the digital diagnosis 
parameters of the anti-spoofing 
optical transceiver(s) 
customized by H3C 

display transceiver diagnosis 
interface [ interface-type 
interface-number ] 

Available for anti-spoofing 
pluggable optical 
transceiver(s) customized 
by H3C only 

 

Display the APP to be adopted at 
next startup 

display boot-loader [ unit unit-id ] 

Display the module type and 
operating status of each board 

display device [ manuinfo [ unit 
unit-id ] | unit unit-id ] 

Display CPU usage of a switch 

display cpu [ unit unit-id ] 

Display the operating status of the 
fan 

display fan [ unit unit-id [ fan-id ] ] 

Display memory usage of a switch 

display memory [ unit unit-id ] 

Display the operating status of the 
power supply 

display power [ unit unit-id [ power-id ] ] 

Available in any 
view.