3com 5500-ei pwr Guía De Referencia

 

1-17 

Fabric name is fab, system mode is L3. 

Fabric authentication : no authentication, number of units in stack: 1. 

Unit Name                                 Unit ID 

First                                     1(*) 

First                                     2 

First                                     8 

<Sysname>update fabric test.bin 

 This will update the Fabric. Continue? [Y/N] y 

 The software is verifying ... 

 The result of verification is : 

 Unit ID   Free space(bytes)       Enough       Version comparison 

    1          2126848               Y              Y 

    2          2125824               Y              Y 

    8          1439744               Y              Y 

 warning: the verification is completed, start the file transmission [Y/N] y 

 The fabric is being updated, 100% 

 The test.bin is stored on unit 1 successfully 

 The test.bin is stored on unit 2 successfully 

 The test.bin is stored on unit 8 successfully 

 Do you want to set test.bin to be running agent next time to boot[Y/N] y 

The test.bin is configured successfully 

boot attribute-switch { all | app | configuration | web } fabric 

User view 

all: Specifies all the files, including app files, configuration files and Web files. 

app: Specifies app files. 

configuration: Specifies configuration files. 

web: Specifies Web files. 

fabric: Specifies to apply the configuration to the whole fabric. 

Use the boot attribute-switch command to switch between the main and backup attribute for all the 

files or a specified type of files. That is, change a file with the main attribute to one with the backup 

attribute, or vice versa. 

# Switch the attributes of all the files in the fabric. 

<Sysname> boot attribute-switch all fabric