3com 5500-ei pwr Guía De Referencia

 

2-6 

# Specify VLAN-interface 1 as the source interface that the TFTP client uses every time it connects to a 

TFTP server. 

<Sysname> system-view 

System View: return to User View with Ctrl+Z. 

[Sysname] tftp source-interface Vlan-interface 1 

tftp source-ip ip-address 

System view 

ip-address: The source IP address that the switch uses every time it connects to a TFTP server. 

Use the tftp source-ip command to specify the source IP address that a TFTP client uses every time it 

connects with a TFTP server. The specified IP address must exist; otherwise, a prompt appears to 

show the configuration fails. 

Use the undo tftp source-ip command to cancel the source IP address setting. The switch uses the IP 

address of the outbound interface in the local routing table as the source IP address to connect to a 

TFTP server. The destination of the outbound interface is the subnet where the TFTP server resides. 

By default, no source IP address is specified for the switch to connect to the TFTP server. 

# Specify 192.168.0.1 as the source IP address that the TFTP client uses every time it connects to a 

TFTP server. 

<Sysname> system-view 

System View: return to User View with Ctrl+Z. 

[Sysname] tftp source-ip 192.168.0.1 

tftp-server acl acl-number 

undo tftp-server acl 

System view 

acl-number: Basic ACL number, in the range 2000 to 2999.