3com 5500-ei pwr Guía De Referencia

 

1-1 

display channel [ channel-number | channel-name ] 

Any view 

channel-number: Channel number, ranging from 0 to 9, corresponding to the 10 channels of the 

system. 

channel-name: Channel name, by default, the name of channel 0 to channel 9 is (in turn) console, 

monitor, loghost, trapbuffer, logbuffer, snmpagent, channel6, channel7, channel8, channel9. 

Use the display channel command to display the settings of an information channel. 

If no argument is specified in the command, the settings of all channels are displayed. 

# Display the settings of information channel 0. 

<Sysname> display channel 0 

channel number:0, channel name:console 

MODU_ID  NAME     ENABLE LOG_LEVEL     ENABLE TRAP_LEVEL    ENABLE DEBUG_LEVEL 

ffff0000 default  Y      warning       Y      debugging     Y      debugging   

display info-center [ unit unit-id ] 

Any view 

unit-id: Unit ID of the device.