3com 5500-ei pwr Guía De Referencia

 

1-8 

None 

Use the info-center enable command to enable the information center. 

Use the undo info-center enable command to disable the information center. 

The switch can output system information to the log host, the console, and other destinations only when 

the information center is enabled. 

By default, the information center is enabled. 

Related commands: display info-center,  info-center loghost,  info-center logbuffer,  info-center 

console channel,  info-center monitor channel, info-center trapbuffer,  info-center snmp 

channel. 

# Enable the information center. 

<Sysname> system-view 

System View: return to User View with Ctrl+Z. 

[Sysname] info-center enable 

% Information center is enabled 

info-center logbuffer [ channel { channel-number | channel-name } | size buffersize ]* 

undo info-center logbuffer [ channel | size ] 

System view 

channel: Sets the channel through which information outputs to the log buffer. 

channel-number: Channel number, ranging from 0 to 9, corresponding to the 10 channels of the 

system. 

channel-name: Channel name, by default, the name of channel 0 to channel 9 is (in turn) console, 

monitor, loghost, trapbuffer, logbuffer, snmpagent, channel6, channel7, channel8, channel9. 

size buffersize: Specifies the size of the log buffer (number of messages the buffer holds) you want to 

display. The buffersize argument ranges from 0 to 1,024 and defaults to 512. 

Use the info-center logbuffer command to enable information output to the log buffer. 

Use the undo info-center logbuffer command to disable information output to the log buffer. 

By default, information output to the log buffer is enabled with channel 4 (logbuffer) as the default 

channel and a maximum buffer size of 512. 

This command works only when the information center is enabled.