3com 5500-ei pwr Guía De Referencia

 

1-11 

channel-name: Channel name, by default, the name of channel 0 to channel 9 is (in turn) console, 

monitor, loghost, trapbuffer, logbuffer, snmpagent, channel6, channel7, channel8, channel9. 

Use the info-center monitor channel command to set the channel through which information is output 

to user terminals. 

Use the undo info-center monitor channel command to restore the default channel through which 

information is output to user terminals. 

By default, output of system information to the monitor is enabled with a default channel name of 

monitor and a default channel number of 1. 

This command works only when the information center is enabled. 

Related commands: info-center enable, display info-center. 

# Set the system to output information to user terminals through channel 0. 

<Sysname> system-view 

System View: return to User View with Ctrl+Z. 

[Sysname] info-center monitor channel 0 

info-center snmp channel { channel-number | channel-name } 

System view 

channel-number: Channel number, ranging from 0 to 9, corresponding to the 10 channels of the 

system. 

channel-name: Channel name, by default, the name of channel 0 to channel 9 is (in turn) console, 

monitor, loghost, trapbuffer, logbuffer, snmpagent, channel6, channel7, channel8, channel9. 

Use the info-center snmp channel command to set the channel through which information is output to 

the SNMP agent. 

By default, output of system information to the SNMP NMS is enabled with a default channel name of 

snmpagent and a default channel number of 5. 

Related commands: snmp-agent, display info-center. 

# Set the switch to output information to the SNMP agent through channel 6. 

<Sysname> system-view 

System View: return to User View with Ctrl+Z.