3com 5500-ei pwr Guía De Referencia

 

3-18 

device-name: File name, in the form of unit[NO.]>flash:, which is used to indicate that the specified file 

is stored in the Flash of a specified switch. 

Use the update fabric command to upgrade the host software of all devices in a Fabric. 

# Use the file named s5500.app in the Flash memory of Unit 2 to upgrade the host software of the 

devices in a Fabric. 

<Sysname> update fabric unit2>flash:/s5500.app 

 This will update the Fabric. Continue? [Y/N] y 

 The software is verifying ... 

 The result of verification is : 

 Unit ID   Free space(bytes)       Enough       Version comparison 

    1          15281873              Y              Y 

    2          15409873              Y              Y 

 warning: the verification is completed, start the file transmission? [Y/N] y 

 The fabric is being updated,  100% 

 The s5500.app is stored on unit 1 successfully! 

 The s5500.app is stored on unit 2 successfully! 

 Do you want to set s5500.app to be running agent next time to boot?[Y/N] y 

 The s5500.app is configured successfully! 

xmodem get { file-url | device-name } 

User view 

file-url: Path plus name of a host software file in the Flash, a string of 1 to 64 characters. 

device-name: File name, in the form of unit[NO.]>flash:, which is used to indicate that the specified file 

is stored in the Flash of a specified switch. 

Use the xmodem get command to download files from the local device connected with the Console 

port of a switch through XModem. This command can be configured only when the device logging onto 

a switch through the Console port. 

Note that, the communication parameter settings of the Console port of the switch and those of the 

serial port of the local device must be consistent and, the interface type of the Console port must be 

AUX. 

# Download files through XModem. 

<Sysname> xmodem get flash:/config.cfg