3com 5500-ei pwr Guía De Referencia

 

1-28 

send-trap { all | { probefailure | testcomplete | testfailure }* }  

undo send-trap { all | { probefailure | testcomplete | testfailure }* }  

remote-ping test group view 

probefailure: Sends a trap when a probe fails.  

testcomplete: Sends a trap after a test is finished.  

testfailure: Sends a trap when a test fails.  

all: Sends a trap when any of the above-mentioned scenarios occurs.  

Use the send-trap command to enable debugging for a trap.  

Use the undo send-trap command to disable debugging for a trap.  

By default, no trap is output.  

# Send a trap message after an ICMP test is finished.  

<Sysname> system-view 

System View: return to User View with Ctrl+Z 

[Sysname] remote-ping administrator icmp 

[Sysname-remote-ping-administrator-icmp] test-type icmp 

[Sysname-remote-ping-administrator-icmp] send-trap testcomplete 

remote-ping test group view 

None 

Use the sendpacket passroute command to enable routing table bypass.  

Use the undo sendpacket passroute command to disable routing table bypass. 

By default, routing table bypass is disabled.