3com 5500-ei pwr Guía De Referencia

 

1-6 

Use the reset garp statistics command to clear the GARP statistics (including statistics about packets 

received/sent/discarded by GVRP) on the specified or all ports. You can use the display garp 

statistics command to view the NDP statistics before and after the execution of the reset garp 

statistics command to verify the execution result. 

Executing the reset garp statistics command without any parameter clears the GARP statistics of all 

ports. 

Related commands: display garp statistics. 

# Clear GARP statistics of all ports. 

<Sysname> reset garp statistics 

display gvrp statistics [ interface interface-list ] 

Any view 

interface interface-list: Specifies an Ethernet port list. By providing a value for this argument, you can 

display the GVRP statistics on the specified ports. You need to provide the interface-list argument in the 

format of { interface-type interface-number [ to interface-type interface-number ] } &<1-10>, where the 

interface-type argument represents the port type, the interface-number argument represents the port 

number, and & <1-10> means that you can provide up to 10 port indexes/port index ranges for this 

argument.  

Note that, this command displays GVRP statistics only on the trunk ports included in the list. Statistics 

on non-trunk ports will not be displayed.  

Use the display gvrp statistics command to display the GVRP statistics of trunk ports. 

This command displays the following information: 

z 

GVRP status 

z 

Number of the GVRP entries that fail to be registered 

z 

Source MAC address of the previous GVRP PDU 

z 

GVRP registration type of a port 

# Display the GVRP statistics of Ethernet1/0/1, assuming that the port is a trunk port. 

<Sysname> display gvrp statistics interface Ethernet 1/0/1 

        GVRP statistics on port Ethernet1/0/1