3com 5500-ei pwr Guía De Referencia

 

1-37 

# Set the timeout time for one probe in an ICMP test to 10 seconds.  

<Sysname> system-view 

System View: return to User View with Ctrl+Z 

[Sysname] remote-ping administrator icmp 

[Sysname-remote-ping-administrator-icmp] test-type icmp 

[Sysname-remote-ping-administrator-icmp] timeout 10 

tos value 

remote-ping test group view 

value: ToS value in a remote-ping test packet header, in the range of 0 to 255.  

Use the tos command to configure the ToS value in a remote-ping test packet header.  

Use the undo tos command to remove the ToS value in a remote-ping test packet header.  

By default, no ToS value is configured. 

 

This command does not apply to DHCP tests.  

 

# Set the ToS value in the header of an ICMP test packet to 1.  

<Sysname> system-view 

System View: return to User View with Ctrl+Z 

[Sysname] remote-ping administrator icmp 

[Sysname-remote-ping-administrator-icmp] test-type icmp 

[Sysname-remote-ping-administrator-icmp] tos 1 

ttl number