3com 5500-ei pwr Guía De Referencia

 

2-3 

group-id: Monitor link group ID, ranging from 1 to 24.  

Use the monitor-link group command to create a monitor link group and enter monitor link group view. 

If the monitor link group has been created, you enter the monitor link group view directly.   

Use the undo monitor-link group command to remove a monitor link group.  

After the monitor link group is configured, member ports of the monitor link group need to be configured.  

Related commands: port monitor-link group, link-aggregation group, smart-link group, port.  

 

Make sure that the monitor link group has no members before executing the undo monitor-link group 

command. 

 

# Create a monitor link group.  

<Sysname> system-view 

System View: return to User View with Ctrl+Z. 

[Sysname] monitor-link group 1 

 New Monitor Link Group has been created. 

[Sysname-mtlk-group1] 

port interface-type interface-number { uplink | downlink } 

undo port interface-type interface-number 

Monitor link group view 

interface-type: Port type. 

interface-number: Port number. 

uplink: Specifies the specified port as the uplink port of the monitor link group 

downlink: Specifies the specified port as the downlink port of the monitor link group 

Use the port command to configure the specified port as a member of the monitor link group.  

Use the undo port command to remove the specified port from the current monitor link group.