3com 5500-ei pwr Guía De Referencia

 

1-19 

Interval: Interval (in seconds) to perform statistics on port information. This argument ranges from 5 to 

300 (in step of 5) and is 300 by default.  

Use the flow-interval command to set the interval to perform statistics on port information.  

Use the undo flow-interval command to restore the default interval. 

By default, this interval is 300 seconds.  

When you use the display interface interface-type interface-number command to display the 

information of a port, the system performs statistical analysis on the traffic flow passing through the port 

during the specified interval and displays the average rates in the interval. For example, if you set the 

interval to 100 seconds, the displayed information is as follows: 

 Last 100 seconds input:  0 packets/sec 0 bytes/sec 

 Last 100 seconds output:  0 packets/sec 0 bytes/sec 

Related commands: display interface. 

# Set the interval to perform statistics on the Ethernet 1/0/1 port to 100 seconds. 

<Sysname> system-view 

System View: return to User View with Ctrl+Z. 

[Sysname] interface ethernet 1/0/1 

[Sysname-Ethernet1/0/1] flow-interval 100 

undo giant-frame statistics enable 

System view 

None 

Use the giant-frame statistics enable command to enable the giant-frame statistics function.  

Use the undo giant-frame statistics enable command to disable the giant-frame statistics function. 

By default, the giant-frame statistics function is not enabled.  

After enabling the giant-frame statistics function, you can use the display interface command to view 

the statistics about giant frames.