3com 5500-ei pwr Guía De Referencia

 

1-5 

System View: return to User View with Ctrl+Z. 

[Sysname] mac-address static 000f-e20f-0101 interface GigabitEthernet 1/0/1 vlan 2 

undo mac-address aging destination-hit enable 

System view 

None 

Use the mac-address aging destination-hit enable command to enable the destination MAC address 

triggered update function. 

Use the undo mac-address aging destination-hit enable command to disable the function. 

With the destination MAC address triggered update function, the switch, when forwarding packets, 

updates the MAC address entries for the destination MAC addresses. This increases the MAC address 

table update frequency, improves the usability of the MAC address table, and reduces broadcasts.  

By default, the destination MAC address triggered update function is disabled. 

# Enable destination MAC address triggered update. 

<Sysname> system-view 

System View: return to User View with Ctrl+Z. 

[Sysname] mac-address aging destination-hit enable 

mac-address max-mac-count count 

Ethernet port view 

count: Maximum number of MAC addresses a port can learn. This argument ranges from 0 to 4096. A 

value of 0 disables the port from learning MAC addresses. 

Use the mac-address max-mac-count command to set the maximum number of MAC addresses an 

Ethernet port can learn.