3com 5500-ei pwr Guía De Referencia

 

1-23 

AUX user interface view 

1: Sets the stopbits to 1. 

1.5: Sets the stopbits to 1.5. 

2: Sets the stopbits to 2. 

Use the stopbits command to set the stopbits of the user interface. 

Use the undo stopbits command to revert to the default stopbits. 

Execute these two commands in AUX user interface view only. 

By default, the stopbits is 1. 

 

z 

The Switch 5500-EI does not support communication with a terminal emulation program with 

stopbits set to 1.5. 

z 

Changing the stop bits value of the switch to a value different from that of the terminal emulation 

utility does not affect the communication between them. 

 

# Set the stop bits to 2. 

<Sysname> system-view 

System View: return to User View with Ctrl+Z. 

[Sysname] user-interface aux 0 

[Sysname-ui-aux0] stopbits 2 

telnet { hostname | ip-address } [ service-port ]  [ source-interface interface-type interface-number | 

source-ip ip-address ] 

User view 

hostname: Host name of the remote device, a string of 1 to 20 characters.  

ip-address: IPv4 address of the remote device. 

service-port: Number of the TCP port through which the remote device provides Telnet service. This 

argument ranges from 0 to 65535, and defaults to 23.