3com 5500-ei pwr Guía De Referencia

 

2-9 

<Sysname> system-view 

System View: return to User View with Ctrl+Z. 

[Sysname] interface Ethernet 1/0/1 

[Sysname-Ethernet1/0/1] port access vlan 10 

[Sysname-Ethernet1/0/1] igmp host-join 225.0.0.1 vlan 10 

igmp lastmember-queryinterval seconds 

undo igmp lastmember-queryinterval 

Interface view 

seconds: Interval in seconds for the IGMP querier to send IGMP group-specific query messages upon 

receiving an IGMP leave message, in the range of 1 to 5. 

Use the igmp lastmember-queryinterval command to configure the IGMP last-member query interval, 

namely the interval between IGMP group-specific queries the IGMP querier sends upon receiving an 

IGMP leave message.  

Use the undo igmp lastmember-queryinterval command to restore the default.  

The IGMP last-member query interval is 1 second by default. 

Related commands: igmp robust-count, display igmp interface. 

# Set the IGMP last-member query interval to 3 seconds on VLAN-interface 10.  

<Sysname> system-view 

System View: return to User View with Ctrl+Z. 

[Sysname] interface Vlan-interface 10 

[Sysname-Vlan-interface10] igmp lastmember-queryinterval 3 

igmp max-response-time seconds 

undo igmp max-response-time