3com 5500-ei pwr Guía De Referencia
3-18
If you do not include the order order-value option in your command, the ACL will be appended to
the end of the group-policy list.
z
If you use this command multiple times on the same multicast group, the first matched traffic rate
configuration in sequence will take effect.
z
Once a multicast forwarding entry is created, subsequent multicast data will not be encapsulated in
register messages before being forwarded even if a register outgoing interface exists. Therefore, to
avoid forwarding failure, do not include the infinity keyword in the spt-switch-threshold
command on a switch that may become an RP (namely, a static RP or a C-RP).
Examples
# Disable RPT-to-SPT switchover on a switch that will never become an RP.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] pim
[Sysname-pim] spt-switch-threshold infinity
source-lifetime
Syntax
source-lifetime interval
undo source-lifetime
View
PIM view
Parameters
interval: Multicast source lifetime in seconds, with an effective range of 210 to 31536000.
Description
Use the source-lifetime command to configure the multicast source lifetime, also known as (S, G)
aging time.
Use the undo source-lifetime command to restore the default.
By default, the lifetime of a multicast source is 210 seconds.