3com 5500-ei pwr Guía De Referencia
4-10
Field
Description
Return Code: Reached-max-hops
Maximum number of hops is reached. Another
possible value is:
possible value is:
Hit-src-RP: The switch of this hop is the source
RP in the (S, G, RP) entry.
RP in the (S, G, RP) entry.
Next-Hop Router Address: 0.0.0.0
If you use the next-hop-info keyword, the
address of Peer-RPF neighbor is displayed.
address of Peer-RPF neighbor is displayed.
Count of SA messages received for this
(S,G,RP)
(S,G,RP)
The number of SA messages received to trace
the (S, G, RP) entry.
the (S, G, RP) entry.
Count of encapsulated data packets received for
this (S,G,RP)
this (S,G,RP)
The number of packets received to trace the (S,
G, RP) entry.
G, RP) entry.
SA cache entry uptime
Length of time for which the cached (S, G) entry
has been existing, in hours:minutes:seconds
has been existing, in hours:minutes:seconds
SA cache entry expiry time
Length of time in which the cached (S, G) entry
will expire, in hours:minutes:seconds
will expire, in hours:minutes:seconds
Peering Uptime: 10 minutes
The time of the peering session between the
local switch and a Peer-RPF neighbor
local switch and a Peer-RPF neighbor
Count of Peering Resets
Count of session resets
originating-rp
Syntax
originating-rp interface-type interface-number
undo originating-rp
View
MSDP view
Parameters
interface-type interface-number: Specifies an interface by its type and number.
Description
Use the originating-rp command to configure the address of the specified interface as the RP address
in SA messages.
Use the undo originating-rp command to cancel configuration.
By default, the RP address in an SA message is the RP address of the PIM domain.
Examples
# Configure the IP address of VLAN-interface 100 as the RP address in SA messages that will be
created by the switch.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] msdp
[Sysname-msdp] originating-rp Vlan-interface 100