3com 5500-ei pwr Guía De Referencia

 

3-4 

habp server vlan vlan-id 

System view 

vlan-id: VLAN ID, ranging from 1 to 4094. 

Use the habp server vlan command to configure a switch to operate as an HABP server. This 

command also specifies the VLAN where HABP packets are broadcast. 

Use the undo habp server vlan command to revert to the default HABP mode. 

By default, a switch operates as an HABP client. 

To specify a switch to operate as an HABP server, you need to enable HABP (using the habp enable 

command) for the switch first. When HABP is not enabled, the habp server vlan command cannot take 

effect. 

# Specify the switch to operate as an HABP server and the HABP packets to be broadcast in VLAN 2. 

(Assume that HABP is enabled.) 

<Sysname> system-view 

System View: return to User View with Ctrl+Z. 

[Sysname] habp server vlan 2 

habp timer interval 

System view 

interval: Interval (in seconds) to send HABP request packets. This argument ranges from 5 to 600. 

Use the habp timer command to set the interval for a switch to send HABP request packets. 

Use the undo habp timer command to revert to the default interval. 

The default interval for a switch to send HABP request packets is 20 seconds. 

Use these two commands on switches operating as HABP servers only.