3com 5500-ei pwr Guía De Referencia

 

4-4 

Use the undo  system-guard ip detect-maxnum command to restore the maximum number of 

infected hosts that can be monitored to the default setting. 

By default, System Guard can monitor a maximum of 30 infected hosts.  

# Set the maximum number of infected hosts that can be concurrently monitored to 50.  

<Sysname> system-view 

System View: return to User View with Ctrl+Z. 

[Sysname] system-guard ip detect-maxnum 50 

system-guard ip detect-threshold ip-record-threshold record-times-threshold isolate-time 

undo system-guard ip detect-threshold 

System view 

ip-record-threshold: Maximum number of IP addresses that can be learnt within a 10-second cycle, in 

the range of 1 to 100.  

record-times-threshold: Maximum number of times an IP address must be hit before an action can be 

taken, in the range of 1 to 10.  

isolate-time: Isolation time, in the range of 3 to 100. After System Guard takes an action on an 

suspected IP address, the system will wait isolate-time before it learns destination address(es) again for 

that source IP address.  

Use the system-guard ip detect-threshold command to set the maximum number of addresses that 

the system can learn, the maximum number of times an address can be hit and the address isolation 

time.  

Use the undo system-guard ip detect-threshold command to set the maximum number of addresses 

that the system can learn, the maximum number of times an address can be hit and the address 

isolation time to the default settings.  

By default, ip-record-threshold,  record-times-threshold and isolate-time are set to 30, 1 and 3 

respectively.