3com 5500-ei pwr Guía De Referencia

 

1-13 

<Sysname> save unit1>flash:/234.cfg 

The current configuration will be saved to unit1>flash:/234.cfg [Y/N]:y 

Now saving current configuration to the device. 

Saving configuration. Please wait... 

........... 

 Unit1 save configuration unit1>flash:/234.cfg successfully 

startup saved-configuration cfgfile [ backup | main ] 

undo startup saved-configuration [ unit unit-id ] 

User view 

cfgfile: Path name or file name of a configuration file in the Flash, a string of 5 to 56 characters. 

backup: Specifies the configuration file to be the backup configuration file. 

main: Specifies the configuration file to be the main configuration file. 

unit  unit-id: Specifies a switch by its unit ID. You can configure a switch in the fabric to use null 

configuration when it restarts by specifying the switch unit ID in unit unit-id. 

Use the startup  saved-configuration command to specify a configuration file to be the main 

configuration file or the backup configuration file to be used for the next startup of the switch. 

Use the undo startup  saved-configuration  command to specify a switch to use null configuration 

when it restarts. 

Note that: 

z 

If you execute the startup saved-configuration command with neither the backup nor the main 

keyword specified, the configuration file identified by the cfgfile argument is specified as the main 

configuration file to be used for the next startup of the switch. 

z 

If the switch has not joined any fabric, the startup saved-configuration command specifies the 

configuration file to be used for the next startup of the switch; if the switch has joined a fabric, this 

command specifies the configuration file to be used for the next startup of all the switches in the 

fabric. 

z 

If the switch has joined a fabric, without the unit keyword, the undo startup saved-configuration 

command will specify all the switches in the fabric to use null configuration when they restart; with 

the unit keyword specified, this command will specify the specified unit in the fabric to use null 

configuration when it restarts.