3com 5500-ei pwr Guía De Referencia

 

1-2 

vlan-id: ID of the specific VLAN interface.  

Use the display  interface Vlan-interface command to display the information about the VLAN 

interface.   

VLAN interface is a virtual interface in Layer 3 mode, used to realize the layer 3 communication 

between different VLANs. Each VLAN has a VLAN interface, which can forward packets of the local 

VLAN to the destination IP addresses at the network layer.  

If the vlan-id argument is specified, the information about the specified VLAN interface is displayed; if 

the vlan-id argument is not specified, the information about all the created VLAN interfaces is displayed.  

Related command: interface Vlan-interface. 

# Display the information about VLAN-interface2. 

<Sysname> display interface Vlan-interface 2 

Vlan-interface2 current state : DOWN 

Line protocol current state : DOWN 

IP Sending Frames' Format is PKTFMT_ETHNT_2, Hardware address is 000f-e207-4101 

Internet Address is 10.1.1.1/24 Primary 

Description : Vlan-interface2 Interface  

The Maximum Transmit Unit is 1500 

Table 1-1 Description on the fields of the display interface Vlan-interface command 

Vlan-interface2 current state 

Current state of the VLAN interface 

Line protocol current state 

Current state of the link protocol 

IP Sending Frames' Format 

Format of the frames that IP sends 

Hardware address 

MAC address corresponding to the VLAN interface

Internet Address 

IP address corresponding to the VLAN interface 

Description Description 

string of the VLAN interface 

The Maximum Transmit Unit 

Maximum transmission unit (MTU) 

 

display vlan [ vlan-id [ to vlan-id ] | all | dynamic | static ] 

Any view 

vlan-id: VLAN ID, in the range of 1 to 4094.