3com 5500-ei pwr Guía De Referencia
2-5
arp protective-down recover enable
Syntax
arp protective-down recover enable
undo arp protective-down recover enable
View
System view
Parameters
None
Description
Use the arp protective-down recover enable command to enable the port state auto-recovery
function on the switch.
Use the undo arp protective-down recover enable command to disable the port state auto-recovery
function of a switch.
With this function enabled, the switch can automatically bring up a port that has been shut down due to
an excessive ARP packet receiving rate after a specified period.
By default, the port state auto-recovery function is disabled.
Examples
# Enable the port state auto-recovery function of the switch.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] arp protective-down recover enable
arp protective-down recover interval
Syntax
arp protective-down recover interval interval
undo arp protective-down recover interval
View
System view
Parameters
interval: Recovery time (in seconds) of a port which is shut down due to an excessive ARP packet
receiving rate. The effective range is 10 to 86,400.
Description
Use the arp protective-down recover interval command to specify a recovery interval. After the
interval, a port that has been shut down due to an excessive ARP packet receiving rate will be brought
up.
Use the undo arp protective-down recover interval command to restore the default.