3com 5500-ei pwr Guía De Referencia
1-6
former case, the unit-id argument is in the range 1 to 8; in the latter case, the unit-id argument can only
be 1.
Description
Use the display packet-filter command to display information about packet filtering.
Examples
# Display information about packet filtering on all ports of a switch that is not in a fabric.
<Sysname> display packet-filter unitid 1
Ethernet1/0/1
Inbound:
Acl 2000 rule 0 running
Ethernet1/0/2
Outbound:
Acl 2001 rule 0 not running
Table 1-3 Description on the fields of the display packet-filter command
Field
Description
Ethernet1/0/1
Port on which packet filtering is performed
Inbound
Direction of the packet filtering, Inbound or
Outbound.
Outbound.
Acl 2000 rule 0
ACL and its rule(s) applied
running
Status of the rule, which can be
z
running: The ACL rule is active.
z
not running: The ACL rule is inactive. Usually,
this is because the current time is out of the
rule’s time range.
this is because the current time is out of the
rule’s time range.
display time-range
Syntax
display time-range { all | time-name }
View
Any view
Parameters
all: Displays all time ranges.
time-name: Name of a time range, a string of 1 to 32 characters that starts with a to z or A to Z.