3com 5500-ei pwr Guía De Referencia

 

1-4 

System view, Ethernet port view 

group-id: Number of a port mirroring group, in the range 1 to 20.  

mirroring-port mirroring-port-list: Specifies a list of source ports. mirroring-port-list  is 

available in system view only, and there is no such argument in Ethernet port view. 

mirroring-port-list  is provided in the format of mirroring-port-list = { interface-type 

interface-number [ to  interface-type interface-number ] }&<1-8>, where interface-type  is 

the port type, and interface-number  is the port number, and &<1-8> means that you can 

specify up to 8 ports or port lists. 

both: Specifies to mirror the packets received on and sent from the source mirroring port. 

inbound: Specifies to mirror the packets received on the source mirroring port.  

outbound: Specifies to mirror the packets sent from the source  mirroring port.  

Use the mirroring-group  mirroring-port  command to configure the source ports for a 

local mirroring group or a remote source mirroring group. 

Use the undo mirroring-group mirroring-port command to remove the source ports of a 

local mirroring group or a remote source mirroring group. 

Note that: 

z 

You cannot configure a member port of an existing mirroring group or a fabric port as 

a source port for port mirroring. 

z 

Before configuring a mirroring source port, make sure that the corresponding mirroring 

group has already been created.  

z 

A copy of each packet passing through a source port will be sent to the corresponding 

destination port.  

Related commands: display mirroring-group. 

# Configure Ethernet 1/0/1 as the source port of local mirroring group 1, and mirror all 

packets received on this port. 

<Sysname> system-view 

System View: return to User View with Ctrl+Z. 

[Sysname] mirroring-group 1 local 

[Sysname] mirroring-group 1 mirroring-port Ethernet 1/0/1 inbound 

mirroring-group group-id monitor-port monitor-port