3com 5500-ei pwr Guía De Referencia

 

1-9 

System View: return to User View with Ctrl+Z. 

[Sysname] interface Ethernet 1/0/3 

[Sysname-Ethernet1/0/3] poe mode signal 

poe power-management { auto | manual } 

System view 

auto: Adopts the auto mode, namely, a PoE management mode based on PoE priority of the port. 

manual: Adopts the manual mode. 

Use the poe power-management command to configure the PoE management mode of port used in 

the case of power overloading. 

Use the undo poe power-management command to restore the default mode. 

By default, the PoE management mode on port is auto. 

You can use the poe priority command to set the PoE priority of a port. 

# Configure the PoE management mode on a port to auto, that is, adopt the PoE management mode 

based on the PoE priority of the port. 

<Sysname> system-view 

System View: return to User View with Ctrl+Z. 

[Sysname] poe power-management auto 

Auto Power Management is enabled 

poe priority { critical | high | low } 

undo poe priority 

Ethernet port view 

critical: Sets the port priority to critical. 

high: Sets the port priority to high. 

low: Sets the port priority to low.