3com 5500-ei pwr Guía De Referencia

 

1-4 

From the above example, you can see the original unit ID of the device with MAC address 

000f-cbb7-3264 is 6. After the configuration, this unit ID changes to 4, and the priority of the device 

changes to 5. 

display ftm { information | topology-database } 

Any view 

information: Displays the FTM module information, including DDP status, unit ID, link status of the 

fabric, status of the fabric port, and DDP packet statistics.  

topology-database: Displays the topology database information of the fabric.  

 Use the display ftm command to display the protocol information or the topology database information 

of the current fabric. 

# Display the FTM module information of the switch.  

<Sysname> display ftm information 

FTM State       : HB STATE 

Unit ID         : 2 (FTM-Master) 

 

Fabric Type     : Line 

Fabric Auth     : NONE 

Fabric Vlan ID  : 4093 

Left Port       : Disable 

Right Port      : Normal 

 

Advertise       : Send = 5, Receive = 3 

Advertise ACK   : Send = 0, Receive = 5 

Heart Beat      : Send = 20, Receive = 0 

 

Left Port       : Index = 255, IsEdge = 0 

Right Port      : Index = 25, IsEdge = 0 

 

Units Num Left  : 1 

Units Num Right : 2 

 

Units Num Backup: 2