3com 5500-ei pwr Guía De Referencia
1-10
2 000f-e20f-5132 5 Left/ 1 M
3 000f-e20f-5252 5 /Right 1 M
4 000f-e20f-8922 5 Left/ 1 M
5 000f-cbb7-2142 5 /Right 1 M
6 000f-cbb7-3264 5 Left/ 1 M
7 000f-cbb7-2260 5 /Right 1 M
8 000f-cbb7-2734 5 Left/ 1 M
From the above example, you can see the priority of each unit changes from 10 to 5, and the numbering
mode changes from A (automatic numbering) to M (manual numbering).
# Remove the saved unit ID of each unit.
<Sysname> undo fabric save-unit-id
The saved unit ID will be erased.
Are you sure? [Y/N] y
Unit 1 removed unit ID successfully.
%Apr 2 19:43:24:368 2000 Sysname FTM/3/FTMCHIDAUTO:- 1 -Change unitid to auto successful,
unit 1 removed UnitID from flash!
Unit 2 removed unit ID successfully.
Unit 3 removed unit ID successfully.
Unit 4 removed unit ID successfully.
Unit 5 removed unit ID successfully.
Unit 6 removed unit ID successfully.
Unit 7 removed unit ID successfully.
Unit 8 removed unit ID successfully.
# Display the unit IDs of the current fabric.
<Sysname> display ftm topology-database
Total number of units in fabric : 8, My Unit ID : 1
UID CPU-Mac Priority Fabric-Port Board-ID A/M
*1 000f-e20f-5002 10 /Right 1 A
2 000f-e20f-5132 10 Left/ 1 A
3 000f-e20f-5252 10 /Right 1 A
4 000f-e20f-8922 10 Left/ 1 A
5 000f-cbb7-2142 10 /Right 1 A
6 000f-cbb7-3264 10 Left/ 1 A
7 000f-cbb7-2260 10 /Right 1 A
8 000f-cbb7-2734 10 Left/ 1 A
From the above example, you can see the priority of each unit restores to 10 and the numbering mode
changes from M (manual numbering) to A (automatic numbering).
fabric-port enable
Syntax
fabric-port interface-type interface-number enable
undo fabric-port interface-type interface-number enable
View
System view