3com 5500-ei pwr Guía De Referencia

 

1-24 

Handshake timer:10 sec 

Handshake hold-time:60 sec 

 

Administrator device mac address:000f-e20f-3901 

Administrator status:Up  

Table 1-5 Description on the fields of the display cluster command 

Cluster name 

Name of the cluster, which can be configured 
through the build command 

Role 

Role of this switch 

Management-vlan 

Number of the management VLAN, which can be 
configured through the management-vlan 
command 

Member number 

Member number of this switch 

Handshake timer 

Interval to send handshake packets, which can 
be configured through the timer command 

Handshake hold-time 

Holdtime of the neighbor status information, 
which can be configured through the holdtime 
command 

Administrator device mac address 

MAC address of the management device 

Administrator status 

Status of the management device 

 

display cluster candidates [ mac-address H-H-H | verbose ] 

Any view 

mac-address H-H-H: Specifies a candidate device by its MAC address. H-H-H represents the MAC 

address. 

verbose: Displays detailed information about candidate devices. 

Use the display cluster candidates command to display information about one specified or all 

candidate devices of a cluster.  

You can only use this command on a management device. 

Note that, after a cluster is set up on an S3600 series switch, the switch will collect the topology 

information of the network at the topology collection interval you set and automatically add the 

candidate devices it discovers into the cluster. As a result, if the topology collection interval is too short 

(the default interval is 1 minute), the switches acting as candidate devices will not keep in candidate 

state for a long time – they will change to member devices within a short time. If you do not want the