3com 5500-ei pwr Guía De Referencia

 

1-4 

Table 1-2 display snmp-agent group command output description 

Group name 

SNMP group name of the user 

Security model 

SNMP group security mode, which can be 
AuthPriv (authentication with privacy), 
AuthnoPriv (authentication without privacy), and 
noAuthnoPriv (no authentication no privacy). 

Readview 

Read-only MIB view corresponding to the SNMP 
group 

Writeview 

Writable MIB view corresponding to the SNMP 
group 

Notifyview 

Notify MIB view in which traps can be sent. It 
corresponds to the SNMP group 

storage-type 

Storage type, which can be:  

z 

volatile: Information will be lost if the system 
is rebooted 

z 

nonVolatile: Information will not be lost if the 
system is rebooted 

z 

permanent: Modification is permitted, but 
deletion is forbidden 

z 

readOnly: Read only, that is, no modification, 
no deletion 

z 

other: Other storage types 

 

display snmp-agent mib-view [ exclude | include | viewname view-name ] 

Any view 

exclude: Specifies the SNMP MIB views that are of the excluded type. 

Include: Specifies the SNMP MIB views that are of the included type. 

view-name: Name of an SNMP MIB view to be displayed. 

Use the display snmp-agent mib-view command to display the MIB view configuration of the current 

Ethernet switch, including view name, MIB subtree, subtree mask, and so on. 

For the description of the configuration items of MIB view, refer to the related description in the 

snmp-agent mib-view command. 

# Display the information about the currently configured MIB view. 

<Sysname> display snmp-agent mib-view