3com 5500-ei pwr Guía De Referencia

 

1-9 

           SNMPv3 

Any view 

None 

Use the display snmp-agent trap-list command to display the modules that can generate traps and 

whether the sending of traps is enabled on the modules. 

If a module contains multiple submodules, the trap function of the entire module is displayed as enabled 

as long as the trap function of any of the submodules is enabled. 

Related commands: snmp-agent trap enable. 

# Display the modules that can generate traps and whether the trap function is enabled on the modules. 

<Sysname> display snmp-agent trap-list 

   configuration trap enable 

   flash trap enable 

   ospf trap enable 

   standard trap enable 

   system trap enable 

   vrrp trap enable 

 

   Enable traps :6; Disable traps 0            

In the above output information, enable indicates that traps are allowed to be generated on the module, 

and disable indicates that traps are not allowed to be generated on the module. 

By default, the modules that can generate traps are allowed to generate traps. If you do not need traps 

of some modules, you can use the undo  snmp-agent trap enable command to disable the trap 

function of the specific modules. 

display snmp-agent usm-user [ engineid engineid | username user-name | group group-name ]* 

Any view