3com 8807 Guía De Referencia

C

HAPTER

 60: I

NFORMATION

 C

ENTER

By default, Ethernet switches do not output log information to the console.

This command takes effect only after system logging is started.

Related command: info-center enable, display info-center.

# Configure to output log information to the console through channel 0.

<SW8800> system-view

 

System View: return to User View with Ctrl+Z.

 

[SW8800] info-center console channel 0 

System view

None

Use the info-center enable command to enable the system log function.

Use the undo info-center enable command to disable system log function.

By default, system log function is enabled.

Only after the system log function is enabled can the system output the log 
information to the info-center loghost and console, and so on.

Related command: info-center loghost, info-center logbuffer, info-center 
console channel, info-center monitor channel, display info-center.

# Enable the system log function.

<SW8800> system-view

 

System View: return to User View with Ctrl+Z.

 

[SW8800] info-center enable 

info-center logbuffer [ channel { channel-number | channel-name } | size 
buffersize ]*

undo info-center logbuffer [ channel | size ]

System view