3com 8807 Guía De Referencia

C

HAPTER

 40: BGP/MPLS VPN C

ONFIGURATION

 C

OMMANDS

[SW8800] ospf 100 router-id 2.2.2.2 vpn-instance vpn1

 

[3Com-ospf-100] 

peer group-name advertise-community

undo peer group-name advertise-community

VPNv4 sub-address family view, VPN-instance sub-address family view

group-name: Name of a neighbor peer group, consisting of 1 to 47 alphanumeric 
characters.

Use the peer advertise-community command to configure to transmit the 
community attributes to a specified peer group.

Use the undo peer advertise-community command to cancel this 
configuration.

By default, the BGP advertiser does not transmit the community attributes to peer 
group.

Related command: if-match community-list and apply community.

# Transmit the community attributes to the peer group test.

[3Com-bgp] ipv4-family vpnv4

 

[3Com-bgp-af-vpn] peer test advertise-community 

peer { group-name | peer-address } allow-as-loop [asn-limit]

undo peer { group-name | peer-address } allow-as-loop

VPNv4 sub-address family view, VPN-instance sub-address family view

group-name: Name of a peer group, consisting of 1 to 47 alphanumeric 
characters.

peer-address: IP address of a specified peer.

asn-limit: Maximum times for which autonomous system (AS) number is allowed 
to receive in route updates.