3com 2426-pwr plus Notas De La Versión

3Com Baseline Switch 2426-PWR Plus 

 

v1.0.0.8 Release Notes 

 

 

Page 2 of 2 

•  Ports which are in auto mode or manual mode can be added to trunks. 

•  If you download an incorrect image for Web upgrade, the Switch does not display an 

error message and continues to function normally.  

•  The Switch has limited SNMP support in this release.  

•  Cable diagnostics do not work for the Gigabit ports.  
 
 
 

To upgrade the software in the 3Com Baseline Switch 2426-PWR Plus, perform the 
following procedure: 
 

1.  Obtain (i.e., download) the appropriate upgrade file for your device. 

The upgrade file available from the 3Com web site is provided in an EXE format. 
Please run the executable to reveal the upgrade file. 

2.  Access the web administration interface by pointing your web browser at the IP 

address for the switch. 

3.  Log in to the user interface. Default: Type “admin” in the username field and press 

Return. (The default admin password is to leave the password field blank.) 

4.  Select the “Administration” tab on the menu on the left side of the page and choose 

the Firmware Upgrade tab. 

5.  Click the “Browse” button, which will open a screen for you to select a filename to 

load into the Switch. Select “Open”. 

6.  Click the “OK” button. 

7. 

Follow the instructions in the popups for the remainder of the upgrade.