3com 2816 Guía Del Usuario
Configuring Link Aggregation
39
Modifying Settings and Deleting an Aggregated
Link
Link
Use the Modify/Delete tab to modify the trunk name
and configure flow control and duplex settings of the
aggregated link.
and configure flow control and duplex settings of the
aggregated link.
To modify trunk settings:
1
On the Modify/Delete tab, modify any of the following
settings:
settings:
■
Name — Allows you to label an interface (up to
characters)
characters)
■
Flow Control — Allows automatic or manual
selection of flow control.
selection of flow control.
■
Speed Duplex – Allows auto-negotiation to be
enabled or disabled. When autonegotiation is
disabled, you can force the settings for speed,
duplex mode, and flow control.
enabled or disabled. When autonegotiation is
disabled, you can force the settings for speed,
duplex mode, and flow control.
2
Click Apply.
To delete a trunk, click the corresponding Delete check
box, and then click Apply.
box, and then click Apply.
Figure 19 Modify/Delete Tab
Viewing the Trunk Summary
If you want to view a summary of the trunk settings,
click the Summary tab.
click the Summary tab.