3com 7000 Manual Suplementario
Enable Interface
109
Enable Interface
Enables the interface card port. You are prompted to specify a port.
Command Actions
Command Result
Example
Enter:
1 5 1 1 3.2
Port 2 in slot 3 of the selected interface card is enabled.
The following message is displayed:
Enable port completed successfully.
Enter the menu sequence:
(1) SYS: Platform config
(5) IFC: Interface cards
(n) IFn; (n=1,4)
(1) EIF: Enable interface
(5) IFC: Interface cards
(n) IFn; (n=1,4)
(1) EIF: Enable interface
Enter a parameter at the prompt
Parameter
Format or Range
Port ID
slot.port
Direct access sequence:
1 5 n 1
[parameters]
System action taken:
The selected port on the interface card is enabled.
System message display:
Enable port <slot.port> completed
successfully.