3com 7000 Manual Suplementario
118
C
HAPTER
5: C
ONFIGURING
I
NTERFACE
M
ODULES
Display 622
Interface Module
Information
Interface Module
Information
Reads manufacturing information of a selected interface card. You are
prompted to specify a port. This command is applicable to the 622 ATM
Interface Module and to the 622 ATM Interface Carrier Module.
prompted to specify a port. This command is applicable to the 622 ATM
Interface Module and to the 622 ATM Interface Carrier Module.
Command Actions
Command Result
Example
Enter:
1 5 1 7 3.4
Manufacturing information of the selected interface module in port 3.4
of the interface card #1, an 622 ATM Interface Module, is displayed.
of the interface card #1, an 622 ATM Interface Module, is displayed.
Enter the menu sequence:
(1) SYS: Platform config
(5) IFC: Interface cards
(n) IFn; (n=1,4)
(7) RPE: Read PIGGY technical data
(622M Port only)
Enter a parameter at the prompt
Parameter
Format or Range
Port ID
slot.port
Direct access sequence:
1 5 n 7
[parameters]
System action taken:
Manufacturing information of the selected interface is
displayed.
displayed.
System message display:
Information is displayed as shown in the example
below.
below.