3com 7000 Manual Suplementario
258
C
HAPTER
9: M
ANAGING
LAN E
MULATION
S
ERVICES
Enable LECS
Enables the LECS in the CoreBuilder 7000 family ATM switch after the
next reboot. This command also enables the resident LESs.
next reboot. This command also enables the resident LESs.
Command Actions
Command Result
Example
Enter:
1 1 5 2 2
The following message is displayed:
LECS service status is set for the next reboot.
Enter menu sequence:
(1) SYS: Platform Setup
(1) SET: Switch Setup
(5) SLE: LE Setup
(2) LCS: LECS Setup
(2) ELS: Enable & save LECS service
Direct access sequence:
1 1 5 2 2
System action taken:
The LECS is enabled after the next reboot. The LES is
also enabled.
also enabled.
System message display:
LECS service status is set for the next
reboot.