3com 7000 Manual Suplementario
410
C
HAPTER
13: C
ONFIGURING
AND
M
ANAGING
PNNI (F
OR
THE
E
XTENDED
V
ERSION
O
NLY
)
Set SVCC Retry Time
Sets the SVCC (Switch Virtual Channel Connection) retry time. The SVCC
retry time is the time that the specified node will delay after a viable
SVCC-based RCC is unexpectedly taken down, before attempting to
reestablish it. A change to the SVCC retry time takes place after the next
reboot.
retry time is the time that the specified node will delay after a viable
SVCC-based RCC is unexpectedly taken down, before attempting to
reestablish it. A change to the SVCC retry time takes place after the next
reboot.
Command Actions
Command Result
Example
Enter:
1 1 10 4 3 4 14
The following message is displayed:
Default Value is 30, new value is 20
Press ENTER to continue...
Enter menu sequence:
(1) SYS: Platform config
(1) SET: Switch setup
(10) PNI: PNNI Setup
(4) CFP: Configure PNNI
(3) NCF: Node Configuration
(4) TIM: Timers
(14) SRT: SVCC retry time
Enter a parameter at the prompt
Parameter
Format or Range
initiation time
1-60000 seconds
Direct access sequence:
1 1 10 4 3 4 14
System action taken:
The SVCC retry time is displayed and is updated to its
new value.
new value.
System message display:
Default value is <x>. New value is <y>