3com 7000 Manual Suplementario
Switch Redundancy
65
Set Switch
Redundancy Mode
Sets the switch redundancy mode of the CoreBuilder 7000 family ATM
switch.
switch.
Command Actions
Command Result
Example
Enter:
1 1 13 2
The following prompt is displayed:
Table 13 Switch Redundancy Status Parameters
Parameter
Description
Redundancy mode
Enhanced (version 4.5) or base (version 4.0)
Switch Engine Slot 1
Status of switch engine in specified slot:
■
active
■
redundant standby
■
redundant suspended
Switch Engine Slot 2
I/F card for communication
Slot number of interface card to be used for
communication
communication
Inter-Switch Communication status
Established or not established
Configuration status
Synchronized or not synchronized
Enter the menu sequence:
(1) SYS: Platform config
(1) SET: Switch setup
(13) SRS: Switch Redundancy setup
(2) SRM: Set switch redundancy mode
Enter a parameter at the prompt
Parameter
Format
Redundancy
0 - Enhanced
1 - Basic
1 - Basic
Direct access sequence:
1 1 13 2
[parameter]
System action taken:
The switch redundancy mode of the CoreBuilder 7000
family ATM switch is set.
family ATM switch is set.
System message display:
Full redundancy mode invoked.