3com 7000 Manual Suplementario

Setting Up for Management

Update Subnet Mask

Address

Updates the subnet mask address of the CoreBuilder 7000 family ATM
switch. The default factory subnet mask address is 255.255.255.0. The
subnet mask address is updated after the next reboot of the switch.

Run the integrated fast setup to configure this parameter.

Command Actions

Command Result

Example

Enter:

1 1 2 4 2 255.255.255.0

The Subnet Mask address is updated to 255.255.255.0.

Enter the menu sequence:

(1) SYS: Platform config

(1) SET: Switch setup

(2) MNG: Management setup

(4) MSK: Subnet Mask Setup

(2) SSM: Set & Save Subnet Mask

Enter a parameter at the prompt

Parameter

Format or Range

Subnet mask address

valid IP address

Direct access sequence:

1 1 2 4 2

[parameters]

System action taken:

The subnet mask address is updated after the next
reboot of the switch.

System message display:

Run integrated fast setup to configure
this parameter.