3com 7000 Manual Suplementario
86
C
HAPTER
4: C
ONFIGURING
AND
M
ANAGING
THE
S
WITCH
M
ODULES
Resetting
Configuration
Parameters
Configuration
Parameters
The following commands allow you to reset selected configuration
parameters for the CoreBuilder 7000 family ATM switch in flash memory.
parameters for the CoreBuilder 7000 family ATM switch in flash memory.
■
■
■
■
Display Configuration
Parameter Groups
Displays the configuration parameter groups for the CoreBuilder 7000
family ATM switch as they are organized in flash memory.
family ATM switch as they are organized in flash memory.
Command Actions
Command Result
Example
Enter:
1 2
1
The following information is displayed:
Enter the menu sequence:
(1) SYS: Platform config
(2) FLS: Flash setup
(1) DCG: Display config param groups
Direct access sequence:
1 2 1
System action taken:
All configuration parameter groups are displayed.
System message display:
Information is displayed as shown in the example
below.
below.
Block ID Group name Group ID Max.len. Actual len. No.of rec.
----------------------------------------------------------------------------
2 LECS Database 01000001 64512 64336 -----
2 LECS Order List 01000002 00896 00260 -----
4 PVC Connections 00000003 65448 00000 00000
1 Box Profile 00000001 10152 01560 00026
1 ATM Addresses 00000002 16384 00056 -----
1 PNNI Configuration 04000001 08192 02884 -----
1 LANE Security 03000001 15360 00000 00000