3com 7000 Instruccion De Instalación
4
I
NSTALLING
AND
C
ONNECTING
C
ORE
B
UILDER
M
ODULES
This chapter describes how to install and replace the CoreBuilder
®
7000
family modules. The following modules are covered.
■
■
■
■
■
The installation procedures of the other modules of the CoreBuilder 7000
family modules are described in their respective guides.
family modules are described in their respective guides.
This chapter also describes how to connect the CoreBuilder 7000 family
ATM switch to network devices.
ATM switch to network devices.
Safety Precautions
When handling replacement parts, 3Com recommends that you always
use a wrist strap connected to a proper ground. This helps prevent the
module from being damaged by electrostatic discharge. Additionally,
when not in use, the module should be stored in an antistatic bag.
use a wrist strap connected to a proper ground. This helps prevent the
module from being damaged by electrostatic discharge. Additionally,
when not in use, the module should be stored in an antistatic bag.
If the system is powered on when you are replacing a module, do not
insert any metal objects, such as a screwdriver or a finger with jewelry, in
the open slot. This could cause burns or other bodily harm, as well as
system damage.
insert any metal objects, such as a screwdriver or a finger with jewelry, in
the open slot. This could cause burns or other bodily harm, as well as
system damage.