3com 9000 Manual Suplementario

Descargar
Página de 12
6
7-S
LOT
 C
HASSIS
 F
AN
 T
RAY
 R
EMOVAL
 
AND
 R
EPLACEMENT
 G
UIDE
The fans begin rotating the moment that you power on the chassis or 
that you insert the fan tray into a powered-on chassis.
Visually inspect all installed fans to verify that each is turning without 
interruption. If a fan is not running, shut the power off and remove 
and reinsert the fan tray.
Operating Guidelines
Follow these operating guidelines for the CoreBuilder 9000 fans:
If one fan in the fan tray fails, replace the fan tray as soon as 
possible.
Do not leave the fan tray partially out of the fan tray slot. Make 
certain the fan tray is fully inserted into the slot.
CAUTION: The CoreBuilder 9000 Enterprise Switch 7-slot chassis sends 
a fan fault message (known as a trap) and can continue to run if one 
fan fails in the fan tray. Replace the fan tray as soon as possible if one 
fan fails in the fan tray. If one fan in the fan tray fails and the 
temperature is 45 °C (113 °F) or greater, a trap message alerts you to 
replace the fan tray immediately.
Locating 3Com
User Documentation
The CoreBuilder 9000 Enterprise Switch Getting Started Guide is 
available in Adobe Acrobat Portable Document Format (PDF) format on 
the 3Com Documentation CD-ROM that comes with the product.
The CD-ROM also contains:
Additional CoreBuilder 9000 documentation in Adobe Acrobat 
format
Adobe Acrobat Reader and Reader installation instructions
If you have difficulty installing the Acrobat Reader, use an Internet 
browser to download the Reader from the Adobe home page at 
http://www.Adobe.com.
You can view additional 3Com technical documentation on the 3Com 
home page at http://www.3com.com. Click Support and look under 
Documents and Software.