3com nj105 Guía Del Usuario
27
Make sure the wall or cubicle opening where the IntelliJack is
being installed complies with the British Standard Institute (BSI):
BS 4664:1970 standard, as described below.
being installed complies with the British Standard Institute (BSI):
BS 4664:1970 standard, as described below.
Make sure the distance between the back of the IntelliJack and
the inside of the wall or cubicle opening is at least 25mm to
maintain an acceptable bend radius on the cable.
the inside of the wall or cubicle opening is at least 25mm to
maintain an acceptable bend radius on the cable.
D
Installation Planning