3com 140m Guía Del Usuario
Y
OUR
S
WITCH
A
DDRESSES
You can configure IP address information for your
switch, enabling you to manage it over the network.
It is important that you note down this information as
you may need to refer to it when managing the
switch again. Use this page to note down your
settings.
switch, enabling you to manage it over the network.
It is important that you note down this information as
you may need to refer to it when managing the
switch again. Use this page to note down your
settings.
If you want to initialize the switch, the IP address
settings are retained to allow you to continue
managing the switch. If you want to return the switch
to its default address settings, you must enter them
manually.
settings are retained to allow you to continue
managing the switch. If you want to return the switch
to its default address settings, you must enter them
manually.
For information on configuring the IP address settings
using the:
using the:
■
Web interface — refer to
■
Command Line Interface — refer to
Parameter
Default
Your setting
Device
name
name
Switch 140M
Location
(blank)
Contact
(blank)
IP address
0.0.0.0
Subnet
mask
mask
0.0.0.0
Serial Line
IP address
IP address
192.168.101.1
Subnet
mask
mask
255.255.255.0
Router
IP address
IP address
0.0.0.0