3com 3CDSG8 Guía Del Usuario

76 

 

CLI Reference Guide 

 
 
 

This section describes using the Command Line Interface(CLI) to manage the device. The device 
is managed through the CLI from a direct connection to the device console port. 
 

________________________________________________________________

Using the CLI, network managers enter configuration commands and parameters to configure 
the device. Using the CLI is very similar to entering commands on a 
UNIX system.  
 

 
To start using the CLI via a console port: 
 

1.

  Connect the RJ-45 cable to the Console port of the switch to the serial port of the 

terminal or computer running the terminal emulation application. 

2.

  Set the baud rate to 38400. 

3.

  Set the data format to 8 data bits, 1 stop bit, and no parity. 

4.

  Set Flow Control to none. 

5.

  Under Properties, select VT100 for Emulation mode. 

6.

  Select Terminal keys for Function, Arrow, and Ctrl keys. Ensure that the setting is 

for Terminal keys (not Windows keys). 

The Login process requires a User Name and Password. The default user name for first time 
configuration is admin. No password is required. User names and passwords are case sensitive. 
 
To logon to the CLI Interface: 
 

1.

  After the switch has booted up, The Login prompt displays: 

 
Username: 

 

2.

  Enter your User Name at the Login prompt. 

3.

  Press Enter. The Password prompt displays: 

 
Password: 

 
The Login information is verified, and displays the following 
 
Press ? or help to get help. The help depends on the context: 
   - At top level, a list of command groups will be shown. 
   - At group level, a list of the command syntaxes will be shown. 
   - If given after a command, the syntax and a description of the 
     command will be shown. 
>