3com S7906E Instruccion De Instalación
1-11
z
Description information of MSDP peers
z
Name of an MSDP mesh group
z
MSDP peer connection retry interval
Configuring MSDP Peer Description
With the MSDP peer description information, the administrator can easily distinguish different MSDP
peers and thus better manage MSDP peers.
Follow these steps to configure description for an MSDP peer:
To do...
Use the command...
Remarks
Enter system view
system-view
—
Enter public instance MSDP
view or VPN instance MSDP
view
view or VPN instance MSDP
view
msdp [ vpn-instance
vpn-instance-name ]
vpn-instance-name ]
—
Configure description for an
MSDP peer
MSDP peer
peer peer-address description
text
text
Required
No description for MSDP peers
by default
by default
Configuring an MSDP Mesh Group
An AS may contain multiple MSDP peers. You can use the MSDP mesh group mechanism to avoid SA
message flooding among these MSDP peers and optimize the multicast traffic.
On one hand, an MSDP peer in an MSDP mesh group forwards SA messages from outside the mesh
group that have passed the RPF check to the other members in the mesh group; on the other hand, a
mesh group member accepts SA messages from inside the group without performing an RPF check,
and does not forward the message within the mesh group either. This mechanism not only avoids SA
flooding but also simplifies the RPF check mechanism, because BGP or MBGP is not needed to run
between these MSDP peers.
By configuring the same mesh group name for multiple MSDP peers, you can create a mesh group
assign those MSDP peers to that mesh group.
Follow these steps to create an MSDP mesh group:
To do...
Use the command...
Remarks
Enter system view
system-view
—
Enter public instance MSDP
view or VPN instance MSDP
view
view or VPN instance MSDP
view
msdp [ vpn-instance
vpn-instance-name ]
vpn-instance-name ]
—
Create an MSDP mesh group
and assign an MSDP peer to
that mesh group
and assign an MSDP peer to
that mesh group
peer peer-address
mesh-group name
mesh-group name
Required
An MSDP peer does not belong
to any mesh group by default
to any mesh group by default