3com S7906E Instruccion De Instalación

 

1-3 

Follow these steps to configure MBGP basic functions: 

Enter system view 

— 

Enter BGP view 

bgp as-number 

— 

Specify a peer or peer group 
and its AS number 

peer { group-name | 
ip-address } as-number 
as-number 

Required 

Not specified by default. 

Enter IPv4 MBGP address 
family view 

Required 

Enable a peer or peer group 
created in IPv4 unicast view 

peer { group-name | 
ip-address } enable 

Required 

Not enabled by default 

Specify a preferred value for 
routes from an IPv4 MBGP 
peer or peer group 

peer { group-name | 
ip-address } preferred-value 
value 

Optional 

The default preferred value is 0.

 

You need to configure MBGP basic functions before configuring this task.  

MBGP can advertise routing information in the local AS to neighboring ASs. It redistributes such routing 

information from IGP into its routing table rather than learns the information by itself.  

Follow these steps to configure MBGP route redistribution: 

Enter system view 

— 

Enter BGP view 

bgp as-number 

— 

Enter IPv4 MBGP address 
family view 

— 

Enable route redistribution from 
another routing protocol 

import-route protocol 
[ process-id [ med med-value | 
route-policy 
route-policy-name ] * ] 

Inject a network into the MBGP 
routing table 

network ip-address [ mask | 
mask-length ] [ short-cut | 
route-policy 
route-policy-name ] 

At least one of these 
approaches is required. 

No route redistribution is 
configured by default.