3com S7906E Instruccion De Instalación
1-4
Controlling Route Distribution and Reception
Configuration Prerequisites
Before configuring this task, you need to:
z
Enable IPv6.
z
Configure the IPv6 MBGP basic functions.
Injecting a Local IPv6 MBGP Route
Follow these steps to inject a local IPv6 MBGP route:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter BGP view
bgp as-number
—
Enter IPv6 MBGP address
family view
family view
ipv6-family multicast
—
Inject a network to the IPv6
MBGP routing table
MBGP routing table
network ipv6-address
prefix-length [ route-policy
route-policy-name | short-cut ]
prefix-length [ route-policy
route-policy-name | short-cut ]
Required
Not injected by default
Configuring IPv6 MBGP Route Redistribution
Follow these steps to configure IPv6 MBGP route redistribution:
To do…
Use the command…
Description
Enter system view
system-view
—
Enter BGP view
bgp as-number
—
Enter the MBGP multicast
address family view
address family view
ipv6-family multicast
—
Enable default route
redistribution into the IPv6
MBGP routing table
redistribution into the IPv6
MBGP routing table
default-route imported
Optional
By default, default route
redistribution is not allowed.
redistribution is not allowed.
Enable route redistribution from
another routing protocol
another routing protocol
import-route protocol
[ process-id ] [ med med-value |
route-policy
route-policy-name ] *
[ process-id ] [ med med-value |
route-policy
route-policy-name ] *
Required
Not enabled by default
If the default-route imported command is not configured, using the import-route command cannot
redistribute any IGP default route.